This prefilter removes fine iron powder from discharging liquid of wire cut electro discharge machine (WCEDM). Usable also for honing machine or hydraulic circuit (When pressure is not applied).

Features:

*Powerful magnet prefiltrates fine iron powder from the discharging liquid and thus extends, two times, the service life of paper filter.

*Prefilter recovers other impurities as well as it attracts fine iron powder.Consequently, paper filter can be replaced with such filter with more coarse mesh than conventionally.

*Its duplex construction facilitates temoval of fine iron powder.

*Installs between wire cut electro discharge machine and pump unit.

Extended Life!

Revolution in Filtering for Wire Electric Discharge Machines!

Application:

This prefilter collects fine iron powder in machining fluid during fluid circulation inside the machining tanks of wire electric discharge machines to prolong the service life of filters.

It can also be used for honing machines and hydraulic circuits (under no pressure).

Note: For use for kerosene machining fluids, please contact us.

Features:

*This prefilter has a pump and therefore can be installed simply by connecting hoses (two hoses) to a machining fluid tank. It can be installed in any place and handled easily.

*The powerful magnetism of a rare earth magnet improves the sludge collecting rate.

*The safe construction with the powerful magnet fixed facilitates cleaning.

*The incorporated integrating timer tells when to clean.

Specifications:

Processing capacity: Approx. 1.5 /min.

Pump rating: 3-phase, 200 VAC, 0.2 kW

Weight: Approx. 60 kg(133 lb)

Application:

This magnetic bar is equipped with a stand which permits placing it in a bath to remove iron in the bath fluid. We recommend packing the unit in a polyethylene or vinyl bag beforehand for convenience in removing the iron sticking to the unit.

Specifications:

Magnetic bar used: KGM-20

Features:

The collecting rate and the squeezing performance have been improved.

The durability of driving system has .been improved.

The safety is taken into consideration by adopting a cover at the rotating and the input part.

At the same time, the coolant is prevented from scattering.

The height is lowered so as to be located at various different places.

Please consult us on manufacturing the high magnetic force type which can be used for weak magnetic sludge.

Application:

Suitable for removing iron from liquids (cooling liquid, electric discharge liquid, etc.) in tanks and passages and as an attracting plate to remove iron in powder. They can be used both dry and wet.

Features:

*A magnet block of a construction to cause a strong magnetic force to be concentrated on the magnetic pole.