Features:
The collecting rate and the squeezing performance have been improved.

The durability of driving system has .been improved.

The safety is taken into consideration by adopting a cover at the rotating and the input part.

At the same time, the coolant is prevented from scattering.

The height is lowered so as to be located at various different places.

Please consult us on manufacturing the high magnetic force type which can be used for weak magnetic sludge.

Application:
Super Magclean designed for larger capacity applications. This model can also be used to remove iron particles from coolant.

Application:
This Chip Magclean is designed to remove/collect chips in coolant that is discharged from cutting operations by machine tools.

Features:
Can be used for both water soluble coolant and oil coolant.
The strong magnet and its unique magnetism array ensure a high collection rate.
The construction that allows for large amounts of chip inflow without causing overflows
The drive section is installed outside for easy maintenance and inspection.
The discharge section is so constructed as to cause counter flow of oil to minimize the amount of discharge of oil sticking to chips.
The inflow tank has a sufficient capacity. Coolant can be introduced to the tank directly from the top.
The discharge port can be installed on either the right/left side or bottom side according to the layout of the recycle/circulation system.

Application:
Suitable for removing iron from waste water and cooling water for rolling in steel making plants. This model is also used to remove/collect iron from washing water from blast furnaces, sintering furnaces, dust collectors and other industrial waste water.

Features:
Large capacity ranging from 60 t/h to 360 t/h and a wide variety of models. Highly economical.
A high rate of collection of iron from waste water for economical operations.
A collection rate of 94.5% from waste water of 5% concentration (mixture ratio) of rolled scales of 0.02 to 2 mm in grain size.
Highly effective, simple design/mechanism, results in less trouble. Long lasting, unchangeable magnetic effect.
Smooth inflow and outflow of raw water.
As a secondary effect, part of oily sub-stances is also removed.

Application:
Widely used as a means to transfer chips produced from machining by machine tools to a point of collection. If oil is sticking to chips, they can be degreased by letting oil drop naturally when chips are being transferred.
In particular, this model is suitable for transferring chips from gear cutting machines, end milling machines and milling machines.
This model can also be used for continuous transfer of granular parts.

Features:
Superb durability and safety
Simple construction and practically no maintenance required.
Since there are no exterior moving parts, (the mechanically moving (rotating) parts are housed in the enclosed cylinder) there is no fear of accidents due to collision.
Economical functions
High treating capacity and high transfer efficiency is maintained for long time periods.
As chips are carried away by the spiral slide movement, their movement also causes waste oil to drop off effectively.
There is no place where oil stays and therefore oil drops naturally to improve the efficiency of collection of fluid.
Low running cost
Very little power is required for the motor drive. Most of the work is handled by the permanent magnets.

Application:
This model is designed to effectively attract, convey and remove chips produced from machine tools by a magnetic force while letting oil sticking to chips drop naturally. (This model is suitable for chips shorter than 60 mm.)

Features:
As chips are held by magnets, they can be conveyed on a sharp inclination.
This feature enables it to shorten the line and reduce the floor area and thus contributes to effective three-dimensional utilization of factory space.
Fine chips can be attracted and oil can be removed efficiently.
The optimum design by use of high performance permanent magnets and little attenuation of the magnetic force. Simplified mechanism for trouble-free operation.

Application:
This model is installed in front of a tank to which cutting fluid flows from a machine tool to attract (pick up) chips by a magnetic force in cutting fluid to remove and transport them. (This model is suitable for chips shorter than 60 mm.)

Features:
A model that plays two roles of horizontal conveyor and inclined conveyor in one unit.
Can be installed directly on an oil tank or machine tool.

Application:
This model uses a strong magnetic force generated on the surface of rollers to attract, remove and transport chips produced from drilling machines, multi-axis auto lathes, and a mixture of long and thin chips produced from gear cutting machines and broaching machines.

Features:
As coolant passes between the rollers, fine chips can be caught.
Can be installed directly on an oil tank or machine tool.
Transportation on a sharp inclination is possible.

Extended Life!

Revolution in Filtering for Wire Electric Discharge Machines!

Application:
This prefilter collects fine iron powder in machining fluid during fluid circulation inside the machining tanks of wire electric discharge machines to prolong the service life of filters.

It can also be used for honing machines and hydraulic circuits (under no pressure).

Note: For use for kerosene machining fluids, please contact us.

Features:
*This prefilter has a pump and therefore can be installed simply by connecting hoses (two hoses) to a machining fluid tank. It can be installed in any place and handled easily.

*The powerful magnetism of a rare earth magnet improves the sludge collecting rate.

*The safe construction with the powerful magnet fixed facilitates cleaning.

*The incorporated integrating timer tells when to clean.

Specifications:

Processing capacity: Approx. 1.5 /min.

Pump rating: 3-phase, 200 VAC, 0.2 kW

Weight: Approx. 60 kg(133 lb)

Application:
This prefilter removes fine iron powder from discharging liquid of wire cut electro discharge machine (WCEDM).
Install this prefilter between a wire electric discharge machine and a pump unit.

Features:
Powerful magnet prefiltrates fine iron powder from the discharging liquid and thus extends, two times, the service life of paper filter.
Prefilter recovers other impurities as well as it attracts fine iron powder.
Consequently, paper filter can be replaced with such filter with more coarse mesh than conventionally.
Its duplex construction facilitates removal of fine iron powder.