*Any material for works can be used.

*High accuracy grinding finish is achievable.

*Usable in the wet conditions.

Features:

*Usable for works of any materials in addition to Iron.

*Effective clamping with newly developed“Wax for fixing work”.

*Speedy control for clamping and release of work with Wax on the face plate by special control unit.

*Free from any unfavorable influence to accuracy from distortion of work by mechanical clamp.

*Easy Installation on magnetic chuck of the machine, as not onyl T-slot but also fixing face are made of iron.

*Minimize unfavorable influence to attack from fixing and releasing of work as well as accuracy owing to newly developed fixing Wax.

*Improved operation owing to high-performance cleaner and micro wave cleaner(Option)to clean up residual Wax after work is removed.

Operation Procedure:

1. Clean up face plate for chucking and fixing with thinner or acetone.

2. Press RELEASE Button of Control Unit.
(It takes 70 seconds in average to be reaby for painting Wax.)

3. Paint chuck face with an adequate volume of Wax.

4. Place work on chucking face painted with Wax and press it on the face.

5. Press FIX Button.
(It takes 30 seconds until Wax is hardened.)

6. After lamp of control unit is on to be ready for process, start processing.

7. After processing work finishes, press RELEASE Button.

8. Work becomes movable to be released.

9. Clean up work by micro wave cleaner.

10. Operation finishes.