<Standard type>

Application:

The Battery Aces can offer about the same lifting and transporting capacity as electromagnetic types using a built-in battery where no power supply is available on indoor work sites. When they are mounted as a lifting means on cranes and hoists, they work well in organizing and arranging steel plates and steel materials and loading and unloading works to and from large machine tools.

*LME-10C to -30C are suitable for transporting small steel plates, waste materials and light steel frames.

*LME-60W-A is suitable for transporting wide and relatively thick steel plates weighing up to 6 tons.

*LME-60L-A is suitable for transporting steel plates that tend to warp, in addition to long steel plates and form steels.

Features:

*Since no cord is used, they can be used in a wide variety of work sites.

*The battery used is a commercially available automotive battery for easy replacement.

*There is no fear of accidents due to fallen works caused by power interruption and power supply cable problem.

*The selection by the switch enables automation of repeating attaching and detaching of lifted works, thus allowing lifting work to be done without remote inputs. (Repetition of attach and detach for each touch down on floor)

*The pushbutton switch on the operation panel facilitates manual attaching and detaching of lifted works.

*The rigid body and guard acting as a grip also ensure high impact resistance and durability in severe work conditions.

*For releasing works, the demagnetizing function is automatically activated regardless of manual or auto mode.

*The remaining capacity of the battery can be checked at a glance on a 7-rank level meter. When the battery nears its life, the buzzer sounds.

*The ammeter tells the state of power application to the electromagnet.

*By using a spare battery, while one battery is being used, the other battery can be charged to improve work efficiency.