Small magnetic force holding type drilling machine

Application:
*Mini size weighing only 7 kg. Can be handled easily by female workers.

*Attracting firmly even to thin plates of 5mm thickness, it assures high precision drilling work.

Portable magnetic force holding type drilling machine

Round electromagnetic part

Circular magnet is turnable up to 320°. You can even drill thin steel sheet by placing backing material beneath the sheet.

*Model KCD-1NA

Portable type for bench drill, capable of drilling a f20mm hole.

*Cord ; 5m length.

Application:
A tool designed to facilitate tapping of prepared holes in iron and steel plates, secured with strong magnetic holding by the Magtap. Available in two models: permanent magnet and electromagnet. Tapping can be done either with a manual hand turning tapper, or an electric tapper.

Features:
Provides a stable mounting position/posture, ensured by strong holding power, for easy tapping.
MTP-13 <Manual tapping type>
Small and light weight for easy transportation.
The tap guide holder to facilitate accurate tapping in horizontal and vertical faces.
Wear and damage of taps can be prevented.
The magnet used is a strong permanent magnet.
MTP-25A <Manual turn latchet type>
Tapping can be done only by operating the latchet lever.
The magnet used is a strong electromagnet.
MTP-MT8 <Electric type>
The revolution can be varied steplessly according to tap sizes.
Small and light weight for easy transportation.
When removed from the mounting fixture, the tapper becomes an electric drill.
MTP-MT16 <Electric type>
Speedy tapping can be achieved by the impact method.
The back-forth and right-left adjusting mechanism is incorporated.
When removed from the mounting fixture, the tapper becomes an electric drill. (The main unit is the same as Kanetec Magbore KCD-1NA, but the lock handle faces an opposite direction.)